Table of contents
The numerical study of CLT shear walls with low-yield steel dampers
Guodong Li, Wenhan Liu, Guangzhi FengAiming at the characteristics of large stiffness, low ductility, and poor energy dissipation capacity of cross-laminated timber (CLT) shear wall, a method of opening vertical…
Experimental investigation and numerical simulation of the flexural behavior of reinforced concrete beams strengthened by geopolymer-bonded CFRP
Jinliang Liu, Fangpu YanA numerical simulation of the test beam was carried out with Abaqus and compared with test data to ensure that the modeling method is accurate. An analysis of the effects of the…
Study on the effects of guide fins structures on the flow and thermal uniformity of the motorcycle exhaust thermoelectric generator
Thong Duc Hong, Quan Thien Phan Nghiem, Binh Trong Nguyen, Tinh Van MaiThe purpose of this paper is to investigate the effect of different guide fins structures (i.e. single-layer and double-layer guide fins) on the exhaust flow and thermal…
Mathematical modeling of MHD flow and radiative heat transfer past a moving porous rotating disk with Hall effect
Sanjay Kumar, Kushal SharmaThe present study aims to investigate the effect of radiation on the unsteady magnetohydrodynamic (MHD) flow of a viscous, electrically conducting Newtonian fluid over rotating…
Seismic vulnerability analysis of simply supported continuous bridge during construction
Huizhong Xiong, Shengtang Jiang, Yong Huang, Jian ZhangIn order to explore the damage probability of bridge engineering in the event of earthquake in the construction stages, the analysis method of seismic vulnerability in the…
Global sensitivity analysis of structural models by active subspace and neural network
Chunping Zhou, Zhuangke Shi, Changcong ZhouGlobal sensitivity can measure the influence of input variables on model responses and is of positive significance for the improvement design of structural systems. This work aims…
Mechanical property of Pyro-Carbon coated SiC fibers fabricated by continuous chemical vapor deposition method
Chang Li, Xingui Zhou, Quanchao Gu, Xingheng Yan, Honglei WangA continuous chemical vapor deposition (CVD) method has been used to fabricate pyro-carbon (PyC) coating on continuous silicon carbide (SiC) fibers. The paper aims to evaluate…
A new and direct approach toward modeling gradual strength degradation of metal beams under cyclic bending up to fatigue failure
Heng Xiao, Zi-Tao Li, Lin Zhan, Si-Yu WangThe purpose of this study is to show how gradual strength degradation of metal beams under cyclic bending up to fatigue failure is simulated based on a new elastoplasticity model…
Re-modified quintic B-spline collocation method for the solution of Kuramoto–Sivashinsky type equations
Neeraj Dhiman, Mohammad TamsirThe purpose of this paper is to present a new method, namely, “Re-modified quintic B-spline collocation method” to solve the Kuramoto–Sivashinsky (KS) type equations. In this…
ISSN:
1573-6105Online date, start – end:
2005Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditors:
- Dr Xiao-Ping Zhang
- Professor Zhufeng Yue
- Prof Heng Xiao