To read this content please select one of the options below:

Low computation digital down converter using polyphase IIR filter

Hiren K. Mewada (Electronics and Communication Engineering Department, Chandubhai S Patel Institute of Technology, Charotar University of Science and Technology – Changa)
Jitendra Chaudhari (CHARUSAT Space Research and Technology Centre, Charotar University of Science and Technology – Changa)

Circuit World

ISSN: 0305-6120

Article publication date: 21 August 2019

Issue publication date: 21 August 2019

119

Abstract

Purpose

The digital down converter (DDC) is a principal component in modern communication systems. The DDC process traditionally entails quadrature down conversion, bandwidth reducing filters and commensurate sample rate reduction. To avoid group delay, distortion linear phase FIR filters are used in the DDC. The filter performance specifications related to deep stopband attenuation, small in-band ripple and narrow transition bandwidth lead to filters with a large number of coefficients. To reduce the computational workload of the filtering process, filtering is often performed as a two-stage process, the first stage being a down sampling Hoegenauer (or cascade-integrated comb) filter and a reduced sample rate FIR filter. An alternative option is an M-Path polyphase partition of a band cantered FIR filter. Even though IIR filters offer reduced workload to implement a specific filtering task, the authors avoid using them because of their poor group delay characteristics. This paper aims to propose the design of M-path, approximately linear phase IIR filters as an alternative option to the M-path FIR filter.

Design/methodology/approach

Two filter designs are presented in the paper. The first approach uses linear phase IIR low pass structure to reduce the filter’s coefficient. Whereas the second approach uses multipath polyphase structure to design approximately linear phase IIR filter in DDC.

Findings

The authors have compared the performance and workload of the proposed polyphase structured IIR filters with state-of-the-art filter design used in DDC. The proposed design is seen to satisfy tight design specification with a significant reduction in arithmetic operations and required power consumption.

Originality/value

The proposed design is an alternate solution to the M-path polyphase FIR filter offering very less number of coefficients in the filter design. Proposed DDC using polyphase structured IIR filter satisfies the requirement of linear phase with the least number of computation cost in comparison with other DDC structure.

Keywords

Citation

Mewada, H.K. and Chaudhari, J. (2019), "Low computation digital down converter using polyphase IIR filter", Circuit World, Vol. 45 No. 3, pp. 169-178. https://doi.org/10.1108/CW-02-2019-0015

Publisher

:

Emerald Publishing Limited

Copyright © 2019, Emerald Publishing Limited

Related articles