To read this content please select one of the options below:

Design of a novel triple-band monopole antenna for WLAN/WiMAX MIMO applications in the laptop computer

Jayshri Sharad Kulkarni (Department of Electronics and Telecommunication, Vishwakarma Institute of Information Technology, Pune, India)
Raju Seenivasan (Department of Electronics and Communication Engineering, Thiagarajar College of Engineering, Madurai, India)

Circuit World

ISSN: 0305-6120

Article publication date: 3 September 2019

Issue publication date: 16 October 2019

149

Abstract

Purpose

This paper aims to present a triple-band monopole antenna design of 0.2-mm thickness with an overall dimension of 21 × 8 mm2 for wireless local area network (WLAN)/worldwide interoperability for microwave access (WiMAX) multiple input and multiple output (MIMO) applications in the laptop computer.

Design/methodology/approach

It comprises three monopole radiating elements, namely, strip AD (inverted C), strip EG (inverted J) and strip FI (inverted U) along with two rectangular open-end tuning stubs, namely, “m” and “n” of size 1.5 × 0.9 mm2 and 1.8 × 0.9 mm2, respectively. The proposed structure is compact, cost-effective and easy to integrate inside the laptop computers.

Findings

This structure excites three WLAN (2.4/5.2/5.8 GHz) and three WiMAX (2.3/3.3/5.5 GHz) bands. The proposed antenna array elucidates that it has measured −10dB impedance bandwidth of 11.86 per cent (2.22-2.50) GHz in a lower band (f_l), 6.83 per cent (3.25-3.48) GHz in medium band (f_m) and 16.84 per cent (5.00-5.92) GHz in upper band (f_u). The measured gain and radiation efficiency are above 3.64dBi and 75 per cent, respectively, and isolation better than −20dB. The envelope correlation coefficient (ECC) is less than 0.004. The simulated and measured results are in good concurrence, which confirms the applicability of the proposed antenna array for MIMO applications in the laptop computer.

Originality/value

The proposed antenna is designed without using vias, reactive elements and matching circuits for excitation of WLAN/WiMAX bands in the laptop computers. The design also does not require any additional ground for mounting the antenna. Further, the antenna array, formed by using the same antenna design, does not need additional isolating elements and is designed in such a way that the system ground itself acts as an isolating element. The proposed antenna has a low profile and is ultra-thin, cost-effective and easy to manufacture and can be easily embedded inside the next-generation laptop computers.

Keywords

Citation

Kulkarni, J.S. and Seenivasan, R. (2019), "Design of a novel triple-band monopole antenna for WLAN/WiMAX MIMO applications in the laptop computer", Circuit World, Vol. 45 No. 4, pp. 257-267. https://doi.org/10.1108/CW-04-2019-0034

Publisher

:

Emerald Publishing Limited

Copyright © 2019, Emerald Publishing Limited

Related articles