To read this content please select one of the options below:

Reconstruction of granite microstructure model using simulated annealing method and Voronoi tessellation

Bin Chen (College of Water Conservancy and Hydropower Engineering, Hohai University, Nanjing, China) (The National Key Laboratory of Water Disaster Prevention, Hohai University, Nanjing, China)
Yuan Wang (College of Water Conservancy and Hydropower Engineering, Hohai University, Nanjing, China) (The National Key Laboratory of Water Disaster Prevention, Hohai University, Nanjing, China)
Shaoqing Cui (Zienkiewicz Institute for Modelling, Data and AI, Faculty of Science and Engineering, Swansea University, Swansea, UK)
Jiansheng Xiang (Department of Earth Science and Engineering, Faculty of Engineering, Imperial College London, London, UK)
John-Paul Latham (Department of Earth Science and Engineering, Faculty of Engineering, Imperial College London, London, UK)
Jinlong Fu (Zienkiewicz Institute for Modelling, Data and AI, Faculty of Science and Engineering, Swansea University, Swansea, UK)

Engineering Computations

ISSN: 0264-4401

Article publication date: 18 July 2023

Issue publication date: 15 August 2023

162

Abstract

Purpose

Accurate presentation of the rock microstructure is critical to the grain-scale analysis of rock deformation and failure in numerical modelling. 3D granite microstructure modelling has only been used in limited studies with the mineral pattern often remaining poorly constructed. In this study, the authors developed a new approach for generating 2D and 3D granite microstructure models from a 2D image by combining a heterogeneous material reconstruction method (simulated annealing method) with Voronoi tessellation.

Design/methodology/approach

More specifically, the stochastic information in the 2D image is first extracted using the two-point correlation function (TPCF). Then an initial 2D or 3D Voronoi diagram with a random distribution of the minerals is generated and optimised using a simulated annealing method until the corresponding TPCF is consistent with that in the 2D image. The generated microstructure model accurately inherits the stochastic information (e.g. volume fraction and mineral pattern) from the 2D image. Lastly, the authors compared the topological characteristics and mechanical properties of the 2D and 3D reconstructed microstructure models with the model obtained by direct mapping from the 2D image of a real rock sample.

Findings

The good agreements between the mapped and reconstructed models indicate the accuracy of the reconstructed microstructure models on topological characteristics and mechanical properties.

Originality/value

The newly developed reconstruction method successfully transfers the mineral pattern from a granite sample into the 2D and 3D Voronoi-based microstructure models ready for use in grain-scale modelling.

Keywords

Acknowledgements

This work is funded by the EU Horizon 2020 research and innovation programme under grant agreement No. 654662 (named “SURE”) National Natural Science Foundation of China (U2240210, 52209129) and Hohai University International Cooperation and Exchange Seed Funding Program (1044-B230170502).

Citation

Chen, B., Wang, Y., Cui, S., Xiang, J., Latham, J.-P. and Fu, J. (2023), "Reconstruction of granite microstructure model using simulated annealing method and Voronoi tessellation", Engineering Computations, Vol. 40 No. 6, pp. 1289-1304. https://doi.org/10.1108/EC-09-2022-0604

Publisher

:

Emerald Publishing Limited

Copyright © 2023, Emerald Publishing Limited

Related articles