Electro-thermo-convection in dielectric liquid subjected to partial unipolar injection between two eccentric cylinders
International Journal of Numerical Methods for Heat & Fluid Flow
ISSN: 0961-5539
Article publication date: 22 November 2018
Issue publication date: 29 January 2019
Abstract
Purpose
The purpose of this work is to highlight the effects of partial unipolar injection on electro-thermo-convection (ETC) in dielectric liquid contained between two eccentric cylinders.
Design/methodology/approach
A finite volume method was used to solve governing equations. The study is performed for different parameters, such as radius ratio (0.2 ≤ Γ ≤ 0.6), dimensionless electric Rayleigh number (0 ≤ T ≤ 900), eccentricity (−0.4 ≤ e ≤ 0.4) and thermal Rayleigh number (10 ≤ Ra ≤ 5.105).
Findings
It is found that heat transfer increases with increase in dimensionless electric Rayleigh number and eccentricity ratio.
Originality/value
The originality of this work is to analyze the ETC in dielectric liquid subjected to partial unipolar injection between two eccentric cylinders
Keywords
Acknowledgements
The third and last authors extend their appreciation to the International Scientific Partnership Program ISPP at King Saud University for funding this research work through ISPP# 131. The authors also wish to express their thank to the very competent reviewers for the valuable comments and suggestions.
Citation
Elkhazen, M.I., Hassen, W., Öztop, H.F., Kolsi, L., Al-Rashed, A.A.A.A., Borjini, M.N. and Ali, M.E. (2019), "Electro-thermo-convection in dielectric liquid subjected to partial unipolar injection between two eccentric cylinders", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 29 No. 1, pp. 78-93. https://doi.org/10.1108/HFF-08-2017-0308
Publisher
:Emerald Publishing Limited
Copyright © 2018, Emerald Publishing Limited