To read this content please select one of the options below:

Energy saving with using of elliptic pillows in turbulent flow of two-phase water-silver nanofluid in a spiral heat exchanger

Erfan Khodabandeh (Department of Mechanical Engineering, Amirkabir University of Technology, Tehran, Iran)
Davood Toghraie (Department of Mechanical Engineering, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran)
A. Chamkha (Department of Mechanical Engineering, Prince Mohammad Bin Fahd University, Al-Khobar, Saudi Arabia)
Ramin Mashayekhi (Young Researchers and Elite Club, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran)
Omidali Akbari (Young Researchers and Elite Club, Khomeinishahr Branch, Islamic Azad University, Khomeinishahr, Iran)
Seyed Alireza Rozati (Department of Mechanical Engineering, Isfahan University of Technology, Isfahan, Iran)

International Journal of Numerical Methods for Heat & Fluid Flow

ISSN: 0961-5539

Article publication date: 17 April 2019

Issue publication date: 16 April 2020

202

Abstract

Purpose

Increasing heat transfer rate in spiral heat exchangers is possible by using conventional methods such as increasing number of fluid passes and counter flowing. In addition, newer ideas such as using pillows as baffles in the path of cold and hot fluids and using nanofluids can increase heat transfer rate. The purpose of this study is to simulate turbulent flow and heat transfer of two-phase water-silver nanofluid with 0-6 Vol.% nanoparticle concentration in a 180° path of spiral heat exchanger with elliptic pillows.

Design/methodology/approach

In this simulation, the finite volume method and two-phase mixture model are used. The walls are subjected to constant heat flux of q″ = 150,000 Wm−2. The inlet fluid enters curves path of spiral heat exchanger with uniform temperature Tin = 300 K. After flowing past the pillows and traversing the curved route, the working fluid exchanges heat with hot walls and then exits from the section. In this study, the effect of radiation is disregarded because of low temperature range. Also, temperature jump and velocity slipping are disregarded. The effects of thermophoresis and turbulent diffusion on nanofluid heat transfer are disregarded. By using finite volume method and two-phase mixture model, simulations are performed.

Findings

The results show that the flow and heat transfer characteristics are dependent on the height of pillows, nanoparticle concentration and Reynolds number. Increasing Reynolds number, nanoparticle concentration and pillow height causes an increase in Nusselt number, pressure drop and pumping power.

Originality/value

Turbulent flow and heat transfer of two-phase water-silver nanofluid of 0-6 per cent volume fraction in a 180° path of spiral heat exchanger with elliptic pillows is simulated.

Keywords

Citation

Khodabandeh, E., Toghraie, D., Chamkha, A., Mashayekhi, R., Akbari, O. and Rozati, S.A. (2020), "Energy saving with using of elliptic pillows in turbulent flow of two-phase water-silver nanofluid in a spiral heat exchanger", International Journal of Numerical Methods for Heat & Fluid Flow, Vol. 30 No. 4, pp. 2025-2049. https://doi.org/10.1108/HFF-10-2018-0594

Publisher

:

Emerald Publishing Limited

Copyright © 2019, Emerald Publishing Limited

Related articles