To read this content please select one of the options below:

Preparation and characterization of fluorine-containing soap-free acrylic emulsion

Yilu Gong (School of Chemical Engineering, Zhejiang University of Technology, Hangzhou, China)
Tantan Shao (School of Chemical Engineering, Zhejiang University of Technology, Hangzhou, China)
Lijun Chen (School of Chemical Engineering, Zhejiang University of Technology, Hangzhou, China)

Pigment & Resin Technology

ISSN: 0369-9420

Article publication date: 7 June 2020

Issue publication date: 7 June 2020

203

Abstract

Purpose

Fluorine materials have received the keen attention of many researchers because of their water repellency and low surface free energy. The purpose of this paper is to prepare fluorine-containing soap-free acrylic emulsion, which sodium allyoxypropyl hydroxypropyl sulfonate (COPS-1) and anionic emulsifier sodium a-alkenyl sulfonate (a-AOS) were combined as polymerizable emulsifier, and undecylenic acid (UA) and dodecafluoroheptyl methacrylate(DFMA) were introduced as functional monomer.

Design/methodology/approach

The fluorinated polyacrylate emulsion was successfully prepared by semi-continuous seed emulsion polymerization, wherein the main monomers were methyl methacrylate (MMA) and butyl methacrylate (BA), and the initiator was potassium persulfate (KPS). Sodium alloxypropyl sulfonate (COPS-1) and an anionic emulsifier sodium a-alkenyl sulfonate (a-AOS) were compounded as a polymerizable emulsifier. Besides, undecylenic acid (UA) and dodecafluoroheptyl methacrylate (DFMA) were introduced as the functional monomers.

Findings

The optimum recipe of preparing the modified latex is as follows: the amount of emulsifier was 4%, the ratio of emulsifier (COPS-1: AOS) was 3: 1, and the content of initiator was 0.6%. In this case, the conversion rate of acrylic polymer emulsion was high and the polymerization stability was good. When the amount of monomer UA was 2% and the amount of DFMA was 4%, the overall performance of the emulsion was the best.

Originality/value

The fluorine-containing soap-free acrylic emulsion is prepared via semi-continuous seeded emulsion polymerisation, which sodium allyoxypropyl hydroxypropyl sulfonate (COPS-1) and anionic emulsifier sodium a-alkenyl sulfonate (a-AOS) were combined as polymerizable emulsifier, and undecylenic acid (UA) and dodecafluoroheptyl methacrylate (DFMA) were introduced as functional monomer. There are two main innovations. One is that the fluorine-containing soap-free acrylic emulsion is prepared successfully. The other is that the undecylenic acid is introduced as functional monomer.

Keywords

Citation

Gong, Y., Shao, T. and Chen, L. (2020), "Preparation and characterization of fluorine-containing soap-free acrylic emulsion", Pigment & Resin Technology, Vol. 50 No. 1, pp. 41-47. https://doi.org/10.1108/PRT-02-2020-0015

Publisher

:

Emerald Publishing Limited

Copyright © 2020, Emerald Publishing Limited

Related articles