To read this content please select one of the options below:

Synthesis of water-based cationic polyacrylate copolymer emulsion by RAFT polymerization and its application as an inkjet printing agent

Haojia Su (College of Chemical Engineering, Nanjing Forestry University, Nanjing, China)
Zhengchun Cai (College of Chemical Engineering, Nanjing Forestry University, Nanjing, China)
Zhengwei lv (Anhui Xoanons Chemical Co., Ltd., Chizhou, China)
Yongkang Chen (Anhui Xoanons Chemical Co., Ltd., Chizhou, China)
Yongxin Ji (College of Chemical Engineering, Nanjing Forestry University, Nanjing, China)

Pigment & Resin Technology

ISSN: 0369-9420

Article publication date: 26 June 2020

Issue publication date: 28 August 2020

192

Abstract

Purpose

In this work, the authors used reversible addition-fragmentation transfer (RAFT) polymerization to develop a new cationic acrylate modified epoxy resin emulsion for water-borne inkjet which have the advantages of both polyacrylate and epoxy resin. The emulsion was successfully used in the canvas coating for inkjet printing. This paper aims to contribute to the development of novel cationic emulsions for inkjet printing industry.

Design/methodology/approach

In this work, the epoxy acrylate was synthesized from RAFT agent and epoxy resin firstly. Cationic macromolecular emulsifier was prepared by RAFT polymerization, using 2,2’-Azobisisobutyronitrile as initiator, 2-(dimethylamino)ethyl methacrylate and styrene as monomer, which was directly used to prepare the emulsion. The influences of the amount of 2-(dimethylamino)ethyl methacrylate on particle size, zeta potential and water contact angle were studied. Finally, the cationic emulsion was used to print images by inkjet printing.

Findings

The emulsion has the smallest particle size, the highest potential and the highest water contact angle when the DM content is 13 Wt.%. The transmission electron microscopy analysis reveals the latex particles is core-shell sphere with the diameters in the range 120–200 nm. The emulsion was successfully used in the canvas coating for inkjet printing. This work will contribute to the development of novel cationic emulsions for inkjet printing industry.

Originality/value

The emulsion was successfully used in the canvas coating for inkjet printing. This work will contribute to the development of novel cationic emulsions for inkjet printing industry.

Keywords

Citation

Su, H., Cai, Z., lv, Z., Chen, Y. and Ji, Y. (2020), "Synthesis of water-based cationic polyacrylate copolymer emulsion by RAFT polymerization and its application as an inkjet printing agent", Pigment & Resin Technology, Vol. 49 No. 5, pp. 401-408. https://doi.org/10.1108/PRT-04-2020-0029

Publisher

:

Emerald Publishing Limited

Copyright © 2020, Emerald Publishing Limited

Related articles