Simulation of hot flat rolling of steel by the finite element method
N. Kapaj
(Politecnico di Torino, Italy On leave from the Institute of Metallurgy, Elbasan, Albania.)
E. Amici
(Centro Sviluppo Materiali (CSM). CP 10747, Via di Castel Romano 100/102, 1–00129, Roma, Italy)
S. Ghini
(Centro Sviluppo Materiali (CSM). CP 10747, Via di Castel Romano 100/102, 1–00129, Roma, Italy)
C. Pietrosanti
(Centro Sviluppo Materiali (CSM). CP 10747, Via di Castel Romano 100/102, 1–00129, Roma, Italy)
86
Abstract
This paper presents a finite element simulation of the hot fiat rolling of steel. An elastoplastic behaviour of steel and plane strain are assumed. The results presented here were calculated with the finite element program MARC and they have shown good agreement with experimental data.
Citation
Kapaj, N., Amici, E., Ghini, S. and Pietrosanti, C. (1988), "Simulation of hot flat rolling of steel by the finite element method", Engineering Computations, Vol. 5 No. 2, pp. 151-157. https://doi.org/10.1108/eb023733
Publisher
:MCB UP Ltd
Copyright © 1988, MCB UP Limited