Citation
(2010), "Simple, rapid detection of biodiesel in diesel and oil in water for the nuclear industry", Pigment & Resin Technology, Vol. 39 No. 1. https://doi.org/10.1108/prt.2010.12939aab.002
Publisher
:Emerald Group Publishing Limited
Copyright © 2010, Emerald Group Publishing Limited
Simple, rapid detection of biodiesel in diesel and oil in water for the nuclear industry
Article Type: Environment and safety From: Pigment & Resin Technology, Volume 39, Issue 1
A2 Technologies has announced that its iPAL FTIR analyser is now available with sampling technology and pre-loaded methods specifically designed for measurement of chemical species of significant importance to the nuclear power industry. Battery powdered, portable iPAL analysers are rapidly being adopted in nuclear power plants throughout the world to ensure reliable facility operation, regulatory compliance as well as supporting pro-active maintenance programs.
iPAL systems easily handle some of the most time-consuming chemical measurements – analyses that would typically take hours or even days off site are now handled by the iPAL system right on-site in a matter of minutes. For examples, iPAL analysers quickly and easily measure percent biodiesel in diesel fuel to levels as low as 0.025 percent, well below current worldwide regulatory guidelines. These measurements are carried out in less than 1 min without the necessity to send samples to an outside laboratory. iPAL analysers easily and quickly measure the level of oil in cooling water, level of water in lubrication fluids and degree of oxidation of lubricants or fuel. A2 Technology also offers the PAL analyser, a bench top version of the iPAL, for customers who do not require battery operation or portability.
The rapid analysis capability of the iPAL is a result of the superior performance of the system coupled with A2 Technologies' proprietary TumblIR sampling interface. This sampling system, which is integral in the iPAL system, allows transmission infrared measurement of liquids without the traditional difficulties of using liquid IR cells. Using the pre-loaded methods, the operator simply places a single drop of fluid on a window, initiates a measurement via a single operation, and the system collects, analyses reports the data in easy to understand format. Clean-up is simply a wipe of the sample windows.