COMPEL - The international journal for computation and mathematics in electrical and electronic engineering: Volume 36 Issue 1
Table of contents
Fast circular shapes detection in cylindrical ECT sensors by design selection and nonlinear black-box modeling
Yacine Oussar, Cedric Margo, Jérôme Lucas, Stéphane HoléWithin the framework of image reconstruction in cylindrical electrical capacitance tomography (ECT) sensors, the purpose of this study is to select the structure of a sensor in…
Small-signal discrete-time modeling of digitally controlled three-phase PWM boost rectifier under balanced voltage
Zhiyong Zeng, Xiaoliang Jin, Rongxiang ZhaoThe model for digitally controlled three-phase pulse width modulation (PWM) boost rectifiers is a sampled data model, which is different from the continuous time domain models…
Probabilistic load flow computation using saddle-point approximation
Meghdad Tourandaz Kenari, Mohammad Sadegh Sepasian, Mehrdad Setayesh NazarThe purpose of this paper is to present a new cumulant-based method, based on the properties of saddle-point approximation (SPA), to solve the probabilistic load flow (PLF…
Predictive speed control with fuzzy compensation of a two-mass drive with friction
Piotr Serkies, Krzysztof SzabatThe purpose of this paper is to design and test a linear predictive control algorithm with elements of fuzzy logic in the non-linear speed region of a two-mass system with a…
Modeling and analysis of the effects of the fabrication temperatures on thermal-induced stress and speed performance of nano pMOS transistors
Abderrazzak El BoukiliThe purpose of this paper is to develop and apply accurate and original models to understand and analyze the effects of the fabrication temperatures on thermal-induced stress and…
Outage and BER analysis of dual-carrier modulation over frequency-selective Nakagami-m fading channels
Sai Krishna Kondoju, V.V. ManiThis paper aims to the increasing need for high-speed low-power data transmissions over frequency-selective fading channels has drawn attention to suggest dual-carrier modulation…
A novel mathematical model of bearingless switched reluctance motor considering air-gap edge effect
Ling Chen, Honghua Wang, Chao TanThis paper aims to propose a novel mathematical model of bearingless switched reluctance motor (BSRM). This model differs from conventional mathematical models in the calculation…
Analysis of feedback predictive encoder based ADCs
Anthony Scanlan, Daniel O’Hare, Mark Halton, Vincent O’Brien, Brendan Mullane, Eric ThompsonThe purpose of this paper is to present analysis of the feedback predictive encoder-based analog-to-digital converter (ADC).
Design of an energy storage system based on vanadium redox flow battery considering a simplified model of VRB
Jiazhi Lei, Qingwu Gong, Jun YeThis paper aims to propose a simplified model of vanadium redox flow batteries (VRBs) for VRB energy storage system (ESS) design considering the operational characteristics of…
A modified quantum-based particle swarm optimization for engineering inverse problem
Obaid Ur Rehman, Shiyou Yang, Shafi Ullah KhanThe purpose of this paper is to explore the potential of standard quantum-based particle swarm optimization (QPSO) methods for solving electromagnetic inverse problems.
Average wavelet coefficient-based detection of chaos in oscillatory circuits
Vesna Rubežić, Igor Djurović, Ervin SejdićThe purpose of this paper is to propose a new algorithm for detection of chaos in oscillatory circuits. The algorithm is based on the wavelet transform.
Novel design topology for low leakage field and vibration motor
Sheppard Salon, Lale T. ErgeneThe purpose of the paper is to introduce a novel design topology for an electric motor, which has essentially none of the normal sources of magnetic alternating force.
Design optimization of ferrite assisted synchronous reluctance motor using multi-objective differential evolution algorithm
Nagarajan V.S., Balaji Mahadevan, Kamaraj V., Arumugam R., Ganesh Nagarajan, Srivignesh S., Suudharshana M.The purpose of this paper is performance enhancement of ferrite-assisted synchronous reluctance (FASR) motor using multi-objective differential evolution (MODE) algorithm…
Modelling of a VSC-based multi-terminal HVDC network for dynamic stability analysis
Kosei Shinoda, Xavier Guillaud, Seddik Bacha, Abdelkrim Benchaib, Bruno FrancoisSelf-commuted voltage source converter (VSC) can significantly extend the flexibility and operability of an HVDC system and be used to implement the concept of multi-terminal HVDC…
Mathematical modeling and harmonic analysis of SISFCL
Debraj Sarkar, Debabrata Roy, Amalendu Bikash Choudhury, Sotoshi YamadaA saturated iron core superconducting fault current limiter (SISFCL) has an important role to play in the present-day power system, providing effective protection against…
A novel diagnostic algorithm for AC series arcing based on correlation analysis of high-frequency component of wavelet
Yangkun Wang, Feng Zhang, Shiwen Zhang, Guang YangA multi-load available, response reliable and product-friendly method is in urgent need to diagnose the signs of incipient arcing. This paper aims to propose a novel algorithm…
Detection of time-varying inter-turn short-circuit in a squirrel cage induction machine by means of generalized regression neural network
Wojciech PietrowskiDiagnostics of electrical machines is a very important task. The purpose of this paper is the presentation of coupling three numerical techniques, a finite element analysis, a…
Influence of the shape of squirrel-cage bars on the dimensions of permanent magnets in an optimized line-start permanent magnet synchronous motor
Łukasz Knypiński, Cezary Jedryczka, Andrzej DemenkoThe purpose of this paper is to compare parameters and properties of optimal structures of a line-start permanent magnet synchronous motor (LSPMSM) for the cage winding of a…
Model refinements of transformers via a subproblem finite element method
Patrick Dular, Patrick Kuo-Peng, Mauricio Valencia Ferreira da Luz, Laurent KrahenbuhlThis paper aims to develop a methodology for progressive finite element (FE) modeling of transformers, from simple to complex models of both magnetic cores and windings.
Analysis of leakage field and current non-uniformity for HTS transformer windings using three dimension coupled field-circuit approach
Daoyu Hu, Zhuyong Li, Zhiyong Hong, Zhijian JinThe purpose of this paper is to analyze the influence of different types of winding configurations on the distribution of leakage field and branch currents for a 330-kVA…
Towards design of electrical machines from given air gap field
Arto Poutala, Saku Suuriniemi, Timo Tarhasaari, Lauri KettunenThe purpose of this paper is to introduce a reverted way to design electrical machines. The authors present a work flow that systematically yields electrical machine geometries…
Novel cat swarm optimization algorithm to enhance channel equalization
Diana D.C., Joy Vasantha Rani S.P.Adaptive equalization plays an important role in digital communication to reduce the distortions due to inter-symbol interference. An adaptive filter is used as an equalizer model…
Filter design at the output of the inverter in PMSM drives
Guangming Zhang, Xiaojun Liu, Lei Mei, Huimin Ouyang, Xin DengThis paper aims to describe a simple low-pass filter to suppress torque pulsation and current harmonics in permanent magnet synchronous motor (PMSM) drives.
Numerical analysis of skewed squirrel-cage induction motor taking into account interbar current using 3-D finite element method
Yoshihiro Kawase, Tadashi Yamaguchi, Yoshiki Iwai, Koki Akiyama, Naotaka Toida, Tomoyasu Furukawa, Hiroshi KawanoThe interbar current of a squirrel-cage induction motor (IM) flows in the steel sheets when the secondary conductor is not insulated from the laminated steel sheets. It was…
ISSN:
0332-1649Online date, start – end:
1982Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditor:
- Prof Jan Sykulski