Rapid Prototyping Journal: Volume 24 Issue 8
Strapline:
The international journal for research on additive manufacturing and 3D printingTable of contents
A review of computational modeling in powder-based additive manufacturing for metallic part qualification
Jingfu Liu, Behrooz Jalalahmadi, Y.B. Guo, Michael P. Sealy, Nathan BolanderAdditive manufacturing (AM) is revolutionizing the manufacturing industry due to several advantages and capabilities, including use of rapid prototyping, fabrication of complex…
Fabrication of nanocellulose/PEGDA hydrogel by 3D printing
Aimin Tang, Qinwen Wang, Shan Zhao, Wangyu LiuNanocellulose is characterised by favourable biocompatibility, degradability, nanostructure effect, high modulus and high tensile strength and has been widely applied in various…
Optimization of the driving waveform of a piezoelectric inkjet printhead based on a system dynamics model
Kun Wang, Juntong XiThis paper aims to present an optimization method of the input driving signal of a piezoelectric inkjet printhead to improve droplet consistency and increase jetting frequency.
Mechanical properties of composite parts manufactured in FDM technology
Filip Górski, Wiesław Kuczko, Radosław Wichniarek, Adam HamrolThis paper aims to study strength properties and accuracy of a new type of composites, in which matrix is manufactured additively, whereas infill is a polyurethane resin. The…
Developing laser beam welding parameters for the assembly of steel SLM parts for the automotive industry
Thiemo Valentin Fieger, Maximilian Ferdinand Sattler, Gerd WittThis paper aims to identify issues with joining selective laser melting (SLM) steels with conventional cold rolled steels through remote laser beam welding.
Visualization of the shielding gas flow in SLM machines by space-resolved thermal anemometry
Maximilian Schniedenharn, Frederik Wiedemann, Johannes Henrich SchleifenbaumThe purpose of this paper is to introduce an approach in measuring the shielding gas flow within laser powder bed fusion (L-PBF) machines under near-process conditions (regarding…
Analysis of the influence of polylactic acid (PLA) colour on FDM 3D printing temperature and part finishing
Juliana Breda Soares, João Finamor, Fabio Pinto Silva, Liane Roldo, Luis Henrique CândidoThis paper aims to analyse the effect of different polylactic acid (PLA) colours used on fused deposition modelling (FDM), considering the product finishing quality produced with…
Effect of process parameters on tensile strength of FDM printed PLA part
Shilpesh R. Rajpurohit, Harshit K. DaveThe purpose of this paper to study the tensile strength of the fused deposition modelling (FDM) printed PLA part. In recent times, FDM has been evolving from rapid prototyping to…
A review on additive manufacturing of sand molds by binder jetting and selective laser sintering
Tugdual Amaury Le Néel, Pascal Mognol, Jean-Yves HascoëtThe purpose of this paper is to analyze the current state of the art manufacturing techniques using sand molds for the casting industry by the means of additive manufacturing…
Effect of temperature on the mechanical properties of 3D-printed PLA tensile specimens
Marzio Grasso, Lyes Azzouz, Paula Ruiz-Hincapie, Mauro Zarrelli, Guogang RenRecent advancements of 3D printing technology have brought forward the interest for this technique in many engineering fields. This study aims to focus on mechanical properties of…
Direct rapid manufacturing of molds with conformal cooling channels
Mahesh S. Shinde, Kishor Mahadeorao Ashtankar, Abhaykumar M. Kuthe, Sandeep W. Dahake, Mahesh B. MawaleThis review paper aims to provide an overview of applications of direct rapid manufacturing assisted mold with conformal cooling channels (CCCs) and shows the potential of this…
What we have achieved in the design of 3D printed metal implants for application in orthopedics? Personal experience and review
Zuhao Li, Chenyu Wang, Chen Li, Zhonghan Wang, Fan Yang, He Liu, Yanguo Qin, Jincheng WangThis paper aims to review the latest applications in terms of three-dimensional printed (3DP) metal implants in orthopedics, and, importantly, the design of 3DP metal implants…
Photogrammetric analysis of additive manufactured metallic open cell porous structures
Samuel Evans, Eric Jones, Peter Fox, Chris SutcliffeThis paper aims to introduce a novel method for the analysis of open cell porous components fabricated by laser-based powder bed metal additive manufacturing (AM) for the purpose…
Mechanical behavior of calcium sulfate scaffold prototypes built by solid free-form fabrication
Mitra Asadi-Eydivand, Mehran Solati-Hashjin, Noor Azuan Abu OsmanThis paper aims to investigate the mechanical behavior of three-dimensional (3D) calcium sulfate porous structures created by a powder-based 3D printer. The effects of the…
Layerwise monitoring of electron beam melting via backscatter electron detection
Christopher Arnold, Christoph Pobel, Fuad Osmanlic, Carolin KörnerThe purpose of this study is the introduction and validation of a new technique for process monitoring during electron beam melting (EBM).
ISSN:
1355-2546Online date, start – end:
1995Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditor:
- Professor Ian Gibson