Failure analysis techniques for lead‐free solder joints

Abstract

Purpose

This paper aims to describe and document the application of commonly utilized solder joint failure analysis techniques to lead‐free solder joints.

Design/methodology/approach

Traditional failure analysis techniques, including visual inspection, X‐ray radiography, mechanical strength testing, dye and pry, metallography, microscopy and photomicrography, are reviewed. These techniques are demonstrated as applied to lead‐free and tin lead solder joints. Common failure modes observed in lead‐free and tin lead solder joints are described and compared.

Findings

It is shown that the traditional failure analysis techniques previously utilized for tin lead solder joints are widely applicable to the analysis of lead‐free solder joints. The changes required to effectively apply these techniques to the analysis of lead‐free solder joints are described.

Originality/value

This paper will be instrumental to the process, quality, reliability and failure analysis engineering disciplines in furthering understanding of the application of failure analysis techniques of both tin lead and lead‐free solder joints.

Citation

Castello, T., Rooney, D. and Shangguan, D. (2006), "Failure analysis techniques for lead‐free solder joints", Soldering & Surface Mount Technology, Vol. 18 No. 4, pp. 21-27. https://doi.org/10.1108/09540910610717875