Boeing Phantom Works leading research on X-48B blended wing body concept

Citation

(2006), "Boeing Phantom Works leading research on X-48B blended wing body concept", Aircraft Engineering and Aerospace Technology, Vol. 78 No. 5. https://doi.org/10.1108/aeat.2006.12778eaf.006

Boeing Phantom Works leading research on X-48B blended wing body concept

Boeing Phantom Works leading research on X-48B blended wing body concept

Keywords: Aerospace industry, Military aircraft

In co-operation with NASA and the Air Force Research Laboratory (AFRL), Boeing Phantom Works is taking another step toward exploring and validating the structural, aerodynamic and operational advantages of a futuristic aircraft design called the blended wing body (BWB).

That step has been the design and production of two high fidelity, 21-foot wingspan prototypes of the BWB concept for wind tunnel and flight testing this year. The Air Force has designated the vehicles as the “X-48B,” based on its interest in the design's potential as a flexible, long-range, high- capacity military aircraft.

X-48B Ship No. 1 began wind tunnel testing on April 7 at the Langley Full Scale Tunnel at NASA's Langley Research Center. Testing was completed in early May, the wing was then shipped to NASA's Dryden Flight Research Center in California to serve as a backup to Ship No. 2, which will be used for flight testing later this year. According to the team, both phases of testing are focused on learning more about the low-speed flight-control characteristics of the BWB concept.

“The X-48B prototypes have been dynamically scaled to represent a much larger aircraft and are being used to demonstrate that a BWB is as controllable and safe during takeoff, approach and landing as a conventional military transport aeroplane,” said Norm Princen, Chief Engineer for the X-48B program at Boeing Phantom Works.

The Boeing, NASA and the AFRL co-operative agreement on the X-48B program culminates years of BWB research by NASA and Boeing. AFRL is interested in the concept for its potential future military applications.

“We believe the BWB concept has the potential to cost effectively fill many roles required by the Air Force, such as tanking, weapons carriage, and command and control,” said Capt. Scott Bjorge, AFRL's X-48B program manager. “This research is a great co-operative effort, and a major step in the development of the BWB. AFRL is inspired to be involved in this critical test program.”

NASA also is committed to advancing the BWB concept. NASA and its partners have tested six different blended wing body models of various sizes over the last decade in four wind tunnels at the Langley Research Center.

“One big difference between this aeroplane and the traditional tube and wing aircraft is that – instead of a conventional tail – the blended wing body relies solely on multiple control surfaces on the wing for stability and control,” said Dan Vicroy, Senior Research Engineer at NASA's Langley Research Center. “What we want to do with this wind tunnel test is to look at how these surfaces can be best used to manoeuvre the aircraft.”

The two X-48B prototypes were built for Boeing Phantom Works by Cranfield Aerospace Ltd, in the UK in accordance with Boeing's requirements and specifications. Made primarily of advanced lightweight composite materials, the prototypes weigh approximately 400 pounds each. Powered by three turbojet engines, they will be capable of flying up to 120 knots and 10,000 feet in altitude during flight testing.

Boeing also contracted with Cranfield Aerospace to provide the ground- control station, in which a pilot will remotely control the X-48B during flight research testing.

As part of Boeing's long-range business strategy, its Phantom Works advanced research and development organisation defines and develops innovative technologies and systems such as the blended wing body concept to meet future aerospace needs.