Citation
(2007), "ASTM International Standard helps catapult unmanned aircraft forward", Aircraft Engineering and Aerospace Technology, Vol. 79 No. 4. https://doi.org/10.1108/aeat.2007.12779dab.028
Publisher
:Emerald Group Publishing Limited
Copyright © 2007, Emerald Group Publishing Limited
ASTM International Standard helps catapult unmanned aircraft forward
ASTM International Standard helps catapult unmanned aircraft forward
When ASTM International Committee F38 on unmanned aircraft systems (UASs) was formed in 2003, it is safe to say no one on the committee was thinking about catapults and trebuchets. However, a study of these medieval devices was integral to the development of a new F38 standard, F 2585, specification for design and performance of pneumatic-hydraulic UAS Launch System. F 2585 is under the jurisdiction of Subcommittee F38.01 on Airworthiness.
According to Ryan Schaefer, a member of F38 who worked on F 2585, the committee performed a gap analysis to identify topics where standards were lacking for UAS. “We were surprised to discover that nothing in the literature covers the modern pneumatic and hydraulic versions of medieval devices such as catapults that are commonly used to launch unmanned aircraft.”
In order to write the standard, Schaefer and the task group researched catapults by speaking with experts at catapult manufacturers. This research provided valuable insight that added much to the development of the standard.
F 2585 covers the design and performance of UAS launch systems that operate through a closed-loop pressurised hydraulic or pneumatic system with a hydraulic recovery, or both. To illustrate the gap the standard has filled, Schaefer notes that F 2585 was approved in November 2006 and during the same month it was adopted by the US Department of Defence, which uses nearly 100 catapult-type launching systems for a variety of UASs.