To read this content please select one of the options below:

Retractable Undercarriages: A Historical Review with Descriptions of Examples of the Latest Practice

Aircraft Engineering and Aerospace Technology

ISSN: 0002-2667

Article publication date: 1 January 1936

69

Abstract

AMONG the many problems of drag reduction engaging the critical attention of aircraft designers to‐day, that parasitic appendix known as the undercarriage stands out, in more ways than one, as probably the most serious single offender still challenging the ingenuity of the designing engineer in his unceasing quest for aerodynamic refinement. Not so many years ago, however, quite a number of designers were openly sceptical of the mechanical feasibility of retracting the undercarriage unit; at least, in such a manner as to make it economically worth while. One suspects that our devotion in this country to the thin‐wing biplane had something to do with that particular brand of aerodynamic astigmatism, because it was not until the cantilever low‐wing monoplane became an accepted type that the idea of wheel retraction became a fashionable formula.

Citation

Dowty, G.H. (1936), "Retractable Undercarriages: A Historical Review with Descriptions of Examples of the Latest Practice", Aircraft Engineering and Aerospace Technology, Vol. 8 No. 1, pp. 12-20. https://doi.org/10.1108/eb030005

Publisher

:

MCB UP Ltd

Copyright © 1936, MCB UP Limited

Related articles