Multidiscipline Modeling in Materials and Structures
Issue(s) available: 94 – From Volume: 1 Issue: 1, to Volume: 21 Issue: 2
A comparative analysis of nanoparticle aggregation and non-aggregation in a nanofluid flow over a cylinder influenced by prescribed surface temperature
Muhammad Ramzan, Naila Shaheen, C. Ahamed Saleel, Ibtehal Alazman, Abdulkafi Mohammed Saeed, Seifedine KadryNanofluids enhance heat transfer due to the inclusion of nanoparticles, but the exact reasons remain debated. Limited nanoscale experiments hinder understanding. To investigate…
Prediction of cutting performance in slot milling process of AISI 316 considering energy efficiency using experimental and machine learning methods
Burak Öztürk, Kutay Aydın, Levent UğurThe aim of the study is to optimize the cutting parameters (cutting tool diameter, cutting speed and feed) to minimize energy consumption and surface roughness in the slot milling…
A new matrix-free implicit iteration algorithm based on finite volume method for simulating groundwater seepage flows
Mingliang Zhang, Xiaohui Su, Degao Zou, Yong Zhao, Jiantao Zhang, Haoyang SuThis study proposes a novel algorithm based on the finite volume method for simulating groundwater flows and presents the practical application of this method in geotechnical…
Practical and theoretical optimization of plasma cutting parameters for enhanced quality and efficiency in steel alloy processing
Kuat Kombayev, Gulden Sypainova, Fuad Khoshnaw, Yernat Kozhakhmetov, Sherzod Kurbanbekov, Yerkezhan TabiyevaThis research aimed to identify the optimal plasma cutting parameters for enhancing the quality and efficiency of steel alloy processing. Systematic experiments, supported by…
The optoelectronic, phonon, structural and thermoelectric attributes of full-Heusler Te2AcGa alloy: a DFT approach
Junaid Munir, Saif M.H. Qaid, Faiza Firdous, Nassar N. Asemi, Abdullah Ahmed Ali Ahmed, Quratul AinTo determine the electrical, structural, optical and transport properties calculated using WIEN2k code.
Multiple solutions for gravity-driven thermally heated material of dissipative Ohmic hybrid nanofluids
Mudassar Qamar, Muhammad Yasir, Masood KhanHybrid nanofluids have remarkable characteristics for improving the process of heat transfer. The findings suggest hybrid nanofluids are beneficial heat transfer fluids for…
Free vibration analysis of functionally graded rectangular plates under asymmetric boundary conditions using coupled displacement field method
Venkatalakshmi Nathi, Krishna Bhaskar Kalidindi, Meera Saheb KoppanatiThe purpose of this paper is to investigate the free vibration behavior of a functionally graded (FG) rectangular plate under asymmetric boundary conditions using the coupled…
Mechanical relation under torsional loading for composite round shaft with porous metal foam core
Peisheng LiuThe round shaft that needs to be subjected to torsional loading is a class of common engineering component in engineering structures. The purpose of this paper is mainly to find…
Effects of Stefan blowing and double stratification on convective hybrid nanoliquid flow with convective boundary and entropy generation
Maria Immaculate Joyce, Jagan Kandasamy, Sivasankaran SivanandamThe objective of this work is to investigate the rate of entropy generation of a hybrid nanoliquid (Cu-Ag/Water) flowing on a stretching sheet in the presence of convective…
Relative frugal wavelet transform to detect damages in functionally graded tapered beams made of porous material
Morteza Saadatmorad, Ramazan-Ali Jafari-Talookolaei, Hamidreza Ghandvar, Thanh Cuong-Le, Samir KhatirThis study aims to enhance singularity detection in non-stationary signals by introducing the frugal wavelet transform (FrugWT), a novel variation of the wavelet transform.
Investigating the effect of perforation geometry on the residual stress and mechanical behavior of 3D-printed honeycomb structure
Farshad Nazari, Afshin AbediIn this research, experimental and numerical methods were used to study the effect of pore geometry on residual stress and mechanical behavior of 3D-printed parts. In this regard…
Machinability optimization of carbon fiber reinforced polymer composites for aviation manufacturing parts
Aysun Şirin, Ayhan Aytaç, Ulvi ŞekerSurface roughness and delamination during the milling of carbon fiber reinforced polymer (CFRP) composite parts in aviation can lead to component rejection. This article aims to…
Steady state creep of the silver-tin TLP interconnections of power modules
Mohammad A. Gharaibeh, Markus Feisst, Jürgen WildeThis paper aims to investigate the steady-state creep of the multilayer Silver-Tin transient liquid phase (AgSn-TLP) interconnects of the power modules using experiments and…
Thermal radiation and Cattaneo–Christov heat flux effect on heat transfer inside a porous square enclosure by using LTNE model
P. Sreedevi, P. Sudarsana Reddy, A.J. ChamkhaThis article presents a numerical study of the heat transfer properties of a nanofluid created using engine oil as the common fluid and Fe3O4 nanoparticles within a square cavity…
CuMg2GaS4: a novel photocatalyst with promising properties
Hayat Hocine, Friha Khelfaoui, Y. Al-Douri, Keltouma Boudia, Fabien Fontaine-Vive, Ouafaa Sadouki, Amel Slamani, Kadda Amara, Mawloud Belabbas, Fadila Belkharroubi, M. AmeriThe mechanical properties, including elastic constants and moduli, indicate the material’s stiffness and stability. Our calculations reveal that CuMg2GaS4 is a direct bandgap…
An integrated MCDM approach for dielectric fluid selection during electrical discharge machining of aluminum bronze alloy
Saikat Chatterjee, Partha Protim Das, Shankar ChakrabortyIn electrical discharge machining (EDM) process, EDM oil used as a dielectric fluid plays an important role in determining quality of the machining operation, serving as a medium…
Seismic resistance of concrete arch dams including contraction joints based on damage plasticity model
Vahid Lotfi, Ali Akbar JahanitabarThe proposed model is implemented in a special finite element program for its three-dimensional solid elements (Lotfi, 2009), with its nonlinear dynamic analysis modified…
Thermal affection on hydrogen diffusion in different structures of nickel alloy
Pasquale Cavaliere, Behzad Sadeghi, Zhenghan Chen, Alicja StanislawskaBased on previous research, we choose nickel alloy 718 as the research material and use finite element analysis (FEA) to simulate the hydrogen diffusion in lattice, grain…
Insights into the thermodynamic efficiency of mixed convective hybrid nanofluid flow over a vertical channel through a fractal fractional computation
Ali Raza, Umair Khan, Aurang Zaib, Anuar Ishak, Syed Modassir HussainThis article identifies hybrid nanofluids and industrial thermal engineering devices as significant sources of solar energy. In this study, various nanoparticles suspended in base…
A novel active switchable multi-channel waveguide based on the Bragg scattering mechanism and the force-magnetic coupling effect
Yitong Qiu, Jinqiang Li, Zhiguang SongThis study aims to propose a novel acoustic metamaterial waveguide with active switchable channels by changing the magnetic field strength.
ISSN:
1573-6105e-ISSN:
1573-6113ISSN-L:
1573-6105Online date, start – end:
2005Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditors:
- Dr Xiao-Ping Zhang
- Professor Zhufeng Yue
- Prof Heng Xiao
Further Information
