Pigment & Resin Technology: Volume 33 Issue 5
Strapline:
The international journal of colorants, polymers and colour applicationsTable of contents
Review of basic chemistry of UV‐curing technology
V. Shukla, M. Bajpai, D.K. Singh, M. Singh, R. ShuklaThe market for ultraviolet curing technology has been growing at double‐digit rates in the last 10 years. The main reason for such a rapid technological growth of UV curing is its…
Challenges of UV curable ink‐jet printing inks – a formulator's perspective
Andrew Hancock, Long LinUV curing technology has a number of unique advantages over the conventional curing technologies. However, until very recently, there had been few successful examples of the…
A study of anti‐corrosive effects of Artemisia oil on steel
A. Bouyanzer, B. HammoutiThe effects of natural Artemisia oil on the corrosion of steel in molar hydrochloric acid were studied by the measurements of weight loss, electrochemical and EIS polarisation…
A study of the effects of the process parameters on the flexographic printing problem “dot bridging” – Part I: experimental design and linear run length
D.J. GaltonCommercial pressure has forced improvements in the reduction of press down time. One restraining factor for the flexographic printing process has been the lack of predictability…
An investigation on the moisture resistance of wood finishes
J.A.M. Fotsing, G. NdadjaImpermeability tests had been carried out to compare the moisture resistance of two wood finish paints available on the Cameroonian market. Two types of paints had been used…
ISSN:
0369-9420Online date, start – end:
1972Copyright Holder:
Emerald Publishing LimitedOpen Access:
hybridEditor:
- Professor Long Lin